DT Swiss HXC1501 SPLINE ONE Hybrid 29/275 Disc Center Lock wheelset
DT Swiss HXC 1501 SPLINE ONE Carbon 29/275 hybrid wheelset
The DT Swiss Mullet E-MTB carbon wheelset with high-end technology
Developed for riders looking for the ultimate performance in an eMTB wheelset.
Newly equipped with a carbon rim, the HXC 1501 SPLINE ONE is the top hybrid wheel in the DT Swiss range.
The carbon rim is combined with a redesigned hub shell that offers better resistance to driving and braking torques,
which are higher on modern eMTBs. V With the new 30-tooth Ratchet EXP OS system, the torque generated by the engine and rider is taken directly from the pedals
transferred to the ground. This transmission is made possible by reinforced spokes,
so that even greater acceleration can be generated than with the previous hybrid product range.
Every component has been carefully designed, produced and tested to ensure a stress-free ride and fun, regardless of the level of the rider.
General:
Net weight front wheel: 878g
Rear wheel net weight: 964g
Maximum system weight: 140kg
ASTM classification: 4
E-Bike Ready: Yes (support max. 32km/h or max. 250W)
Rims:
Material: Carbon
Rim connection: -
Tire Interface: Hookless tubeless TSS
Valve hole: Presta
Rim diameter front wheel: 29 / 700C
Rear wheel rim diameter: 27.5 / 650B
Rim height: 25mm
Mouth width: 30mm
Outer Width: 36mm
Hubs:
Hub Type: 240
Axle system / front wheel width: 15x110mm Boost
Axle system / rear wheel width: 12x148mm Boost
Braking system: Centerlock
Cassette mount: SRAM XD
Freehub body: SRAM XD Steel (SSRAM)
Freewheel system: Ratchet EXP OS 30
Spokes and Nipples:
Spokes: DT hybrid 2 straight pull
Spoke Pattern: Three-Cross (1:1)
Nipples: DT ProLock Squorx ProHead Alu
Scope of delivery:
1 x DT Swiss HXC 1501 SPLINE ONE 29 front wheel
1 x DT Swiss HXC 1501 SPLINE ONE 27.5 rear wheel
DT SwissTubeless Tape (installed)
2 x DT Swiss tubeless valves alu black
(Centerlock adapter not included)
new, unassembled and unused original article, OE goods (identical to aftermarket goods) in special packaging
Manufacturer numbers OE goods:
front: WHXC150BEIXCO18285
rear: WHXC150TGDNCO18281
Aftermarket product manufacturer number:
front: WHXC150BEIXCA18285
rear: WHXC150TGDNCA18281
The DT Swiss Mullet E-MTB carbon wheelset with high-end technology
Developed for riders looking for the ultimate performance in an eMTB wheelset.
Newly equipped with a carbon rim, the HXC 1501 SPLINE ONE is the top hybrid wheel in the DT Swiss range.
The carbon rim is combined with a redesigned hub shell that offers better resistance to driving and braking torques,
which are higher on modern eMTBs. V With the new 30-tooth Ratchet EXP OS system, the torque generated by the engine and rider is taken directly from the pedals
transferred to the ground. This transmission is made possible by reinforced spokes,
so that even greater acceleration can be generated than with the previous hybrid product range.
Every component has been carefully designed, produced and tested to ensure a stress-free ride and fun, regardless of the level of the rider.
General:
Net weight front wheel: 878g
Rear wheel net weight: 964g
Maximum system weight: 140kg
ASTM classification: 4
E-Bike Ready: Yes (support max. 32km/h or max. 250W)
Rims:
Material: Carbon
Rim connection: -
Tire Interface: Hookless tubeless TSS
Valve hole: Presta
Rim diameter front wheel: 29 / 700C
Rear wheel rim diameter: 27.5 / 650B
Rim height: 25mm
Mouth width: 30mm
Outer Width: 36mm
Hubs:
Hub Type: 240
Axle system / front wheel width: 15x110mm Boost
Axle system / rear wheel width: 12x148mm Boost
Braking system: Centerlock
Cassette mount: SRAM XD
Freehub body: SRAM XD Steel (SSRAM)
Freewheel system: Ratchet EXP OS 30
Spokes and Nipples:
Spokes: DT hybrid 2 straight pull
Spoke Pattern: Three-Cross (1:1)
Nipples: DT ProLock Squorx ProHead Alu
Scope of delivery:
1 x DT Swiss HXC 1501 SPLINE ONE 29 front wheel
1 x DT Swiss HXC 1501 SPLINE ONE 27.5 rear wheel
DT SwissTubeless Tape (installed)
2 x DT Swiss tubeless valves alu black
(Centerlock adapter not included)
new, unassembled and unused original article, OE goods (identical to aftermarket goods) in special packaging
Manufacturer numbers OE goods:
front: WHXC150BEIXCO18285
rear: WHXC150TGDNCO18281
Aftermarket product manufacturer number:
front: WHXC150BEIXCA18285
rear: WHXC150TGDNCA18281
Product weight: 1800 g
| Shipping weight: | 10.000 kg |
| Product weight: | 1800 g |