ALUTECH P120 complete drive system for 29"

For anyone wishing to convert an eFanes (equipped with EP6, EP8, or EP801 motors) to our ALUTECH P120 system,
we offer the complete P120 system here as a ready-to-install retrofit kit.
Our Alutech motor is manufactured by Gobao and features the standard Shimano 6-bolt frame mounting interface,
making it compatible with all motors in the Shimano EP6, EP8, and EP801 series.
The unit comes pre-loaded with the appropriate Alutech factory software, configured for 29" wheel sizes, and is ready to ride.

The P120 system features 5 riding modes and a walk mode:
-Auto (max. 110 Nm)
-Eco (Nm individually adjustable)
-Trail (Nm individually adjustable)
-Turbo (max. 110 Nm)
-Boost (max. 120 Nm for 30 seconds)
-Walk
The modes can be customized to your personal preferences via the Gobao app.
We offer email support (including photos) for the conversion process to Alutech Fanes customers; however,
anyone wishing to convert a different bike brand equipped with a Shimano EP6/EP8/EP801 motor
to the Gobao/ALUTECH P120 system must carry out the conversion themselves,
though we can still provide details on the standard Alutech conversion procedures via email.

The complete system consists of the following components / scope of delivery:
-Motor: Alutech P120, 250W, 120 Nm, 800W peak power with Shimano mounting interface
-Battery: Gobao 36V 600Wh, cell type Zellentyp Samsung 21700 Lithium Ionen, 3,6V,
battery housing dimensions: length 415mm, width 72mm, height 58mm
-Battery mount: Alutech Gobao mounting system consisting of an aluminum rail holding the power supply connectors and the locking mechanism.
-Battery locking system: Unlocking via 4mm hex key; the Shimano locking mechanism is utilized here,
while the front mount is made by Alutech—CNC-machined from 6061 aluminum and black anodized. Cable length – power supply to motor: 230 mm; charging port connection: 110 mm
-Handlebar display: Alutech BC201, handlebar clamp for 31.8 mm
-Button: Gobao wired control (left side), cable length 240 mm between button (switch) and display
-Charger: Alutech 6A
-Charging port: with magnetically secured cover, cable length 660 mm
-Cables: Gobao custom waterproof (IP7) and fool-proof wiring; cable length 1400 mm (motor to display)
-Cable splitter / Y-cable: adapter cable for speed sensor and lighting, cable length 270 mm
-Speed ​​sensor: sensor pickup at the brake disc, cable length 660 mm
-Speed ​​sensor / magnet: 6-bolt type (bolts onto the brake disc)
-Bolts: 6x motor bolts M8x18 mm, 2x Gobao crank arm bolts M15x1.0 (left-hand and right-hand thread)

Additional required accessories (not included):
-ISIS-type crankset
-Shimano chainring (e.g., 34T)
-For eFanes: carbon down-tube battery cover (the aluminum battery cover from the eFanes cannot be attached to the new Gobao battery)
-For eFanes 1.0: left decorative cover (motor cable cover)
-For eFanes 2.0: left decorative cover (motor cable cover), skid plate, right decorative cover

Weights:
-Motor: Alutech P120 2800g
-Battery: Gobao 36V 600Wh, 3100g
-Battery mount: 340g
-Handlebar display and button: 75g
-Charger: Alutech 6A, 725g
-Charging port: 78g
-Cables: 23g
-Cable splitter / Y-cable: 8g
-Speed ​​sensor: 9g
-Speed ​​sensor / magnet: 3g