DT Swiss FR541 Classic 30 Boost Disc 6-bolt Mullet 29 / 27,5 Enduro/Freeride wheelset
DT Swiss FR 541 Classic 30 Boost 29/27.5 Mullet 15x110mm and 12x148mm Made by Alutech Cycles
Your wheels for Freeride and Enduro, your strong partner for new lines and fast times
The DT Swiss FR 541 Classic wheelset in 29/27.5 with Boost hubs impresses with its outstanding resilience in demanding gravity applications,
Puncture resistance and low weight. Its secret is the 30 mm wide aluminum rim,
which takes into account the load distribution in extreme situations and thus improves handling.
Compared to its predecessor FR 1950, its profile has been specifically strengthened in certain areas,
to provide optimal shock resistance for freeride and downhill.
In addition, the rim flanges are shaped to minimize the risk of tire puncture.
The rim FR541 is identical to the rim from the DT Swiss system wheelset FR1500.
The use of 32 J-Bend spokes on the front wheel and 32 on the rear wheel make this wheelset extremely robust.
Central are the race-proven, lightweight 350 disc 6-hole hubs with ratchet freewheel, which ensures fast power connection and its ease of maintenance is known.
Area of application: Enduro
Wheel size: VR 29 and HR 27.5
Release tire type: clincher/folding tire
Number of spokes: 32 (front and rear)
Braking system: Disc 6-hole (Boost)
Wheel standard: Boost
Tubeless system: Tubeless Ready
Technical data rim:
Type: DT FR 541
Rim flange: with hook / crotchet tubeless TC
Dimension (ETRTO): VR 30-622 / HR 30-584
Inner rim width: 30 mm
External rim width: 35 mm
Rim height: 21 mm
Valve hole: SV (6.5mm)
Rim material: aluminum
Technical data VR hub:
Type:350 Classic
Installation width: 15 x 110 mm thru axle
Nipple material: brass, color black
Releases:
Weight limit: 140 kg (system weight)
ASTM classification: 5
Air pressure (max.): 5 bar
Recommended tire width: max 2.80
Features:
Mullet wheelset with Boost hubs designed for gravity use Highly resilient aluminum rims specifically reinforced in certain areas
optimized rim flanges for 17% better puncture resistance compared to FR 1950 Classic
precise handling for difficult, unknown driving lines
Lightweight 350 hub set with maintenance-friendly, fast freewheel
cold forged spokes
Technologies:
Intended use: Category 5
Suitable for use on extremely steep and rough terrain with very large jumps or
heels at speeds over 40 km/h. Extremely good driving technique required.
Can also be used in bike parks and on DH routes.
Due to the very high load, it is essential to check for possible damage after every trip,
to prevent failure on the next trip. Possibly shortened product lifespan due to extreme use.
Pro Lock
The nipple thread is coated with two-component adhesive to increase the durability of the wheels.
It can be re-centered several times without any problems, but the adhesive strength decreases slightly.
The connection between the spoke and the nipple cannot come apart on its own.
Ratchet
A toothed washer and the threaded ring are integrated into the hub. This reduces the number of components required,
resulting in less wear and lower weight.
In addition, the resilient and reliable toothed disc freewheel system can be maintained quickly and easily.
The key to this is the no-tool concept, as it makes it possible to replace the freewheel without tools.
The freewheel has two discs that mesh together at the same time.
This means that the contact surface is large and the point load is kept small,
which relieves the material and allows the freewheel to work particularly reliably and precisely.
Color info:
Rims: black with white and red decals
Hubs: black and white
Spokes: black
Nipple: black
The DT Swiss FR 541 wheelset is handmade in Ascheffel by Alutech Cycles
Conversion option: Possible conversion to Shimano Micro-Spline freewheel or Shimano HG (not included).
Scope of delivery: 1 x wheelset DT Swiss FR 541 Classic 30 Boost Disc 6-hole 29/275 (front and rear wheel) 1 x freehub body DT Swiss SRAM XD
2 x valve DT Swiss Tubeless 18 - 25 mm brass silver
2 x glued WTB rim tape tubeless tape 32 mm color yellow
Bearing: Steel deep groove ball bearing
Hub body material: aluminum
Disc brake mount: IS 6-hole
Technical data HR hub:
Type:350 Classic
Installation width: 12 x 148 mm thru axle
Bearing: Steel deep groove ball bearing
Hub body material: aluminum
Freehub body material: aluminum
Freewheel system: Ratchet
Freewheel body type: SRAM XD
Disc brake mount: IS 6-hole
Technical data lacing:
Spoke pattern VR and HR: 3-fold crossed
Spoke type/design: DT Champion Round 2.0mm / J-Bend, colour black
Spoke tension: 1200Nm
Nipple type/design: DT Pro Lock Pro Head, 2.0mm
Nipple size: 14mm (length)
Nipple material: brass, color black
Releases:
Weight limit: 140 kg (system weight)
ASTM classification: 5
Air pressure (max.): 5 bar
Recommended tire width: max 2.80
Features:
Mullet wheelset with Boost hubs designed for gravity use Highly resilient aluminum rims specifically reinforced in certain areas
optimized rim flanges for 17% better puncture resistance compared to FR 1950 Classic
precise handling for difficult, unknown driving lines
Lightweight 350 hub set with maintenance-friendly, fast freewheel
cold forged spokes
Technologies:
Intended use: Category 5
Suitable for use on extremely steep and rough terrain with very large jumps or
heels at speeds over 40 km/h. Extremely good driving technique required.
Can also be used in bike parks and on DH routes.
Due to the very high load, it is essential to check for possible damage after every trip,
to prevent failure on the next trip. Possibly shortened product lifespan due to extreme use.
Pro Lock
The nipple thread is coated with two-component adhesive to increase the durability of the wheels.
It can be re-centered several times without any problems, but the adhesive strength decreases slightly.
The connection between the spoke and the nipple cannot come apart on its own.
Ratchet
A toothed washer and the threaded ring are integrated into the hub. This reduces the number of components required,
resulting in less wear and lower weight.
In addition, the resilient and reliable toothed disc freewheel system can be maintained quickly and easily.
The key to this is the no-tool concept, as it makes it possible to replace the freewheel without tools.
The freewheel has two discs that mesh together at the same time.
This means that the contact surface is large and the point load is kept small,
which relieves the material and allows the freewheel to work particularly reliably and precisely.
Color info:
Rims: black with white and red decals
Hubs: black and white
Spokes: black
Nipple: black
The DT Swiss FR 541 wheelset is handmade in Ascheffel by Alutech Cycles
Conversion option: Possible conversion to Shimano Micro-Spline freewheel or Shimano HG (not included).
Scope of delivery: 1 x wheelset DT Swiss FR 541 Classic 30 Boost Disc 6-hole 29/275 (front and rear wheel) 1 x freehub body DT Swiss SRAM XD
2 x valve DT Swiss Tubeless 18 - 25 mm brass silver
2 x glued WTB rim tape tubeless tape 32 mm color yellow
Your wheels for Freeride and Enduro, your strong partner for new lines and fast times
The DT Swiss FR 541 Classic wheelset in 29/27.5 with Boost hubs impresses with its outstanding resilience in demanding gravity applications,
Puncture resistance and low weight. Its secret is the 30 mm wide aluminum rim,
which takes into account the load distribution in extreme situations and thus improves handling.
Compared to its predecessor FR 1950, its profile has been specifically strengthened in certain areas,
to provide optimal shock resistance for freeride and downhill.
In addition, the rim flanges are shaped to minimize the risk of tire puncture.
The rim FR541 is identical to the rim from the DT Swiss system wheelset FR1500.
The use of 32 J-Bend spokes on the front wheel and 32 on the rear wheel make this wheelset extremely robust.
Central are the race-proven, lightweight 350 disc 6-hole hubs with ratchet freewheel, which ensures fast power connection and its ease of maintenance is known.
Area of application: Enduro
Wheel size: VR 29 and HR 27.5
Release tire type: clincher/folding tire
Number of spokes: 32 (front and rear)
Braking system: Disc 6-hole (Boost)
Wheel standard: Boost
Tubeless system: Tubeless Ready
Technical data rim:
Type: DT FR 541
Rim flange: with hook / crotchet tubeless TC
Dimension (ETRTO): VR 30-622 / HR 30-584
Inner rim width: 30 mm
External rim width: 35 mm
Rim height: 21 mm
Valve hole: SV (6.5mm)
Rim material: aluminum
Technical data VR hub:
Type:350 Classic
Installation width: 15 x 110 mm thru axle
Nipple material: brass, color black
Releases:
Weight limit: 140 kg (system weight)
ASTM classification: 5
Air pressure (max.): 5 bar
Recommended tire width: max 2.80
Features:
Mullet wheelset with Boost hubs designed for gravity use Highly resilient aluminum rims specifically reinforced in certain areas
optimized rim flanges for 17% better puncture resistance compared to FR 1950 Classic
precise handling for difficult, unknown driving lines
Lightweight 350 hub set with maintenance-friendly, fast freewheel
cold forged spokes
Technologies:
Intended use: Category 5
Suitable for use on extremely steep and rough terrain with very large jumps or
heels at speeds over 40 km/h. Extremely good driving technique required.
Can also be used in bike parks and on DH routes.
Due to the very high load, it is essential to check for possible damage after every trip,
to prevent failure on the next trip. Possibly shortened product lifespan due to extreme use.
Pro Lock
The nipple thread is coated with two-component adhesive to increase the durability of the wheels.
It can be re-centered several times without any problems, but the adhesive strength decreases slightly.
The connection between the spoke and the nipple cannot come apart on its own.
Ratchet
A toothed washer and the threaded ring are integrated into the hub. This reduces the number of components required,
resulting in less wear and lower weight.
In addition, the resilient and reliable toothed disc freewheel system can be maintained quickly and easily.
The key to this is the no-tool concept, as it makes it possible to replace the freewheel without tools.
The freewheel has two discs that mesh together at the same time.
This means that the contact surface is large and the point load is kept small,
which relieves the material and allows the freewheel to work particularly reliably and precisely.
Color info:
Rims: black with white and red decals
Hubs: black and white
Spokes: black
Nipple: black
The DT Swiss FR 541 wheelset is handmade in Ascheffel by Alutech Cycles
Conversion option: Possible conversion to Shimano Micro-Spline freewheel or Shimano HG (not included).
Scope of delivery: 1 x wheelset DT Swiss FR 541 Classic 30 Boost Disc 6-hole 29/275 (front and rear wheel) 1 x freehub body DT Swiss SRAM XD
2 x valve DT Swiss Tubeless 18 - 25 mm brass silver
2 x glued WTB rim tape tubeless tape 32 mm color yellow
Bearing: Steel deep groove ball bearing
Hub body material: aluminum
Disc brake mount: IS 6-hole
Technical data HR hub:
Type:350 Classic
Installation width: 12 x 148 mm thru axle
Bearing: Steel deep groove ball bearing
Hub body material: aluminum
Freehub body material: aluminum
Freewheel system: Ratchet
Freewheel body type: SRAM XD
Disc brake mount: IS 6-hole
Technical data lacing:
Spoke pattern VR and HR: 3-fold crossed
Spoke type/design: DT Champion Round 2.0mm / J-Bend, colour black
Spoke tension: 1200Nm
Nipple type/design: DT Pro Lock Pro Head, 2.0mm
Nipple size: 14mm (length)
Nipple material: brass, color black
Releases:
Weight limit: 140 kg (system weight)
ASTM classification: 5
Air pressure (max.): 5 bar
Recommended tire width: max 2.80
Features:
Mullet wheelset with Boost hubs designed for gravity use Highly resilient aluminum rims specifically reinforced in certain areas
optimized rim flanges for 17% better puncture resistance compared to FR 1950 Classic
precise handling for difficult, unknown driving lines
Lightweight 350 hub set with maintenance-friendly, fast freewheel
cold forged spokes
Technologies:
Intended use: Category 5
Suitable for use on extremely steep and rough terrain with very large jumps or
heels at speeds over 40 km/h. Extremely good driving technique required.
Can also be used in bike parks and on DH routes.
Due to the very high load, it is essential to check for possible damage after every trip,
to prevent failure on the next trip. Possibly shortened product lifespan due to extreme use.
Pro Lock
The nipple thread is coated with two-component adhesive to increase the durability of the wheels.
It can be re-centered several times without any problems, but the adhesive strength decreases slightly.
The connection between the spoke and the nipple cannot come apart on its own.
Ratchet
A toothed washer and the threaded ring are integrated into the hub. This reduces the number of components required,
resulting in less wear and lower weight.
In addition, the resilient and reliable toothed disc freewheel system can be maintained quickly and easily.
The key to this is the no-tool concept, as it makes it possible to replace the freewheel without tools.
The freewheel has two discs that mesh together at the same time.
This means that the contact surface is large and the point load is kept small,
which relieves the material and allows the freewheel to work particularly reliably and precisely.
Color info:
Rims: black with white and red decals
Hubs: black and white
Spokes: black
Nipple: black
The DT Swiss FR 541 wheelset is handmade in Ascheffel by Alutech Cycles
Conversion option: Possible conversion to Shimano Micro-Spline freewheel or Shimano HG (not included).
Scope of delivery: 1 x wheelset DT Swiss FR 541 Classic 30 Boost Disc 6-hole 29/275 (front and rear wheel) 1 x freehub body DT Swiss SRAM XD
2 x valve DT Swiss Tubeless 18 - 25 mm brass silver
2 x glued WTB rim tape tubeless tape 32 mm color yellow
Product weight: 2.175 kg
| Shipping weight: | 10.000 kg |
| Product weight: | 2.175 kg |
