Beschreibung
DT Swiss FR 541 Classic 30 Boost wheelset, handmade by Alutech Cycles in Ascheffel, Schleswig-Holstein (Northern Germany)
Your wheels for Enduro, Freeride, and DH—a strong partner for tackling new lines and clocking fast times.
The DT Swiss FR 541 Classic wheelset with Boost hubs excels in demanding gravity riding thanks to its outstanding durability,
puncture resistance, and low weight. Its secret lies in the 30 mm wide aluminum rim,
which optimizes load distribution in extreme situations, thereby improving handling.
Compared to its predecessor, the FR 1950, the rim profile has been selectively reinforced in key areas
to provide optimal impact resistance for Freeride and Downhill riding.
Additionally, the rim flanges are shaped to minimize the risk of pinch flats.
The FR 541 rim is identical to the rim used in the DT Swiss FR 1500 system wheelset.
The use of 32 J-bend spokes on both the front and rear wheels makes this wheelset extremely robust.
At the heart of the build are the race-proven, lightweight 350 Disc (6-bolt) hubs featuring the Ratchet freehub system,
renowned for its rapid power engagement and ease of maintenance.
Intended use: Enduro/Freeride/DH
Wheel size: Front 29" and Rear 29"
Tire compatibility: Wire bead/folding tires
Spoke count: 32 (front and rear)
Brake system: 6-bolt disc (Boost)
Wheel standard: Boost
Tubeless system: Tubeless Ready
Rim specifications:
Type: DT FR 541
Rim flange: With hook / Crotchet tubeless TC
Dimensions (ETRTO): 29" 30-622 / 27.5" 30-584
Inner rim width: 30 mm
Outer rim width: 35 mm
Rim height: 21 mm
Valve hole: SV (Presta, 6.5 mm)
Rim material: Aluminum
Front hub specifications:
Type: 350 Classic, 32-hole
Spacing:
-15 x 110 mm thru-axle, BOOST, standard end caps (no RockShox Torque Caps)
-20 x 110 mm, BOOST
Bearings: Steel cartridge bearings
Hub body material: Aluminum
Disc brake mount: IS 6-bolt
Rear hub specifications:
Type: 350 Classic, 32-hole
Spacing:
-12 x 157 mm thru-axle, BOOST
Bearings: Steel cartridge bearings
Hub body material: Aluminum
Material Freehub body: Aluminum
Freehub system: Ratchet
Freehub body type:
-SHIMANO HG (7-11 speed)
-Shimano Micro Spline (12-speed)
-SRAM XD (12-speed)
Disc brake mount: IS 6-bolt
Lacing specifications:
Lacing pattern (front & rear): 3-cross [1:1]
Spoke type/design: DT Champion Round 2.0mm / J-Bend / Black
Spoke tension: 1200 N
Nipple type/design: DT Pro Lock Pro Head, 2.0mm
Nipple size: 14mm (length)
Nipple material: Brass, Black
Features:
Full 29-inch wheelset with Boost hubs, designed for gravity riding
Highly durable aluminum rims with targeted reinforcement in specific areas
Optimized rim flanges for 17% better pinch-flat resistance compared to the FR 1950 Classic
Precise handling for challenging, unfamiliar lines
Lightweight 350 hub set with a fast, easy-to-maintain freehub
Cold-forged spokes
Technologies:
Intended use: Category 5
Suitable for use in extremely steep and rough terrain with very large jumps or
drops at speeds exceeding 40 km/h. Excellent riding technique required.
Also suitable for use in bike parks and on downhill (DH) tracks.
Due to the extremely high loads involved, inspecting for potential damage after every ride is mandatory
to prevent failure during the next ride. The product's service life may be reduced due to such extreme use.
Pro Lock
The nipple threads are coated with a two-component adhesive to enhance wheel durability.
The wheel can be re-trued multiple times without issue, though the adhesive strength decreases slightly.
The connection between the spoke and the nipple cannot work itself loose.
Ratchet
A star ratchet and a threaded ring are integrated into the hub. This reduces the number of required components,
resulting in less wear and lower weight.
Furthermore, the robust and reliable star ratchet freehub system is quick and easy to maintain.
This is largely due to the "no-tool" concept, which allows the freehub to be replaced without tools.
The freehub features two ratchets that engage simultaneously.
This creates a large contact surface and minimizes point loading,
reducing stress on the material and ensuring the freehub operates with exceptional reliability and precision.
Color details:
Rims: black with white and red decals
Hubs: black and white
Spokes: black
Nipples: black
The DT Swiss FR 541 wheelset is handmade in Ascheffel by Alutech Cycles
Conversion option: Can be converted later to SRAM XD, Shimano Micro-Spline, or Shimano HG freehub (not included).
Conversion to DEG or DF is not possible!
Information regarding front hub conversion to Torque Caps:
Front hub compatibility: 350, 370
Manufacturer part number: HWGXXX0009100S
Ratings/Specifications:
-ASTM 5
-System weight limit: 150 kg
-E-bike motor support: max. 31 km/h or 250 W
Scope of delivery:
1 x new and unused Enduro/Freeride/Downhill wheelset (DT Swiss FR 541 Classic 30 Boost Disc 6-bolt; front 29" [choice of 15/20x110mm] / rear 27.5" 12x157mm)
1 x DT Swiss freehub body (as configured)
2 x DT Swiss tubeless valves (18–25 mm, silver brass)
2 x pre-installed WTB High Pressure Tubeless Tape (32 mm, yellow)
-No additional rim decals; only the decals shown in the images are included!