MAVIC wheeset Deemax Enduro SL Mullet SRAM XD

The Deemax Enduro SL 29/27.5 is specifically engineered to meet the demands of the Enduro World Series and satisfy even the most adventurous mountain bikers.
It leverages Mavic’s most advanced technologies to deliver confidence and ultra-responsive handling.
Available in a mullet configuration.

Thanks to ISM4D construction, the rim is lighter without sacrificing strength, resulting in improved handling and control.
The ID360 ratchet hub will be your greatest ally on courses that demand rapid pedaling and high energy output.
Push your limits, knowing your power is being fully transferred to the trail.

Fore technology and Infinity hubs simplify maintenance and enhance durability by allowing for the quick replacement of broken spokes—
without the need to remove the tire or rim tape—saving valuable time during a race
or whenever an inconvenient mechanical issue arises.
Tubeless compatibility without rim tape (Fore technology) and a widened rim channel make tire changes incredibly easy while ensuring a perfect,
long-lasting seal. This allows you to adapt your setup to the terrain or your mood in a flash.

The Deemax Enduro SL 29/27.5 gives you the confidence to conquer any terrain.
The wide, welded rim (30 mm internal width) is designed to absorb the harshest
impacts and provide extra protection for your bike against aggressive obstacles. It also accommodates DH tires ranging from 2" to 3", allowing riders to choose their preferred setup.
Finally, the dual-layer Blackshield treatment protects the Deemax Enduro SL, making it twice as resistant to rock strikes and scratches.
The rim will remain flawlessly black over time—a testament to its strength and durability.

The Deemax Enduro SL is the ultimate choice for racing. It is a top-tier, technical wheelset designed with a focus on ride quality
and durability, ensuring that fun doesn't come at the expense of efficiency.

Hubs:
Freewheel technology: Instant Drive 360
Bearing technology: QRM auto-adjust – sealed cartridge
Axle size: front 15x110 / rear 12x148
Axle material: Aluminum
Body material: Aluminum
Hub shell design: INFINITY
Disc standard: 6-bolt only
Freewheel: SRAM XD MTB

Rims:
Material: Maxtal, black
Tires: UST Tubeless Ready
Brakes: Disc
Joint: SUP welding technology
Depth: 22 mm
Internal width: 30 mm
ETRTO size: 622x30TC / 584x30TC
Profile: Asymmetric
Drilling: Fore tapeless tubeless technology (front/rear 28 holes)
Pre-installed rim tape: WTB High-Pressure, yellow

Spokes:
Material: Steel, black
Nipples: Brass, black
Lacing: 3-cross (front and rear)
Thread: M7
Shape: Straight-pull, extra-flat, bladed (front and rear)

Intended use:
ASTM Category 5: Gravity riding with a focus on descending
Minimum tire size: Width 52 mm – max. pressure 2.95 bar / 43 PSI
Maximum weight supported by the wheels: Must not exceed 150 kg (rider including bike weight)
Maximum tire size: Width 76 mm – Max. pressure 2.45 bar/36 PSI

Verified weight: 2040 g

Scope of delivery:
- 1 set Deemax Enduro SL (as described above, new and unused)
- 1 set Twinworks UST valves (not mounted on the wheel)
- Multifunction adjustment wrench
- 2 spare spokes per wheel

GPSR contact:
Mavic S.A., Zone Industrielle, 104 Rue de la République, FR 74250, Fillinges, mavic@servicecenter.com

Specifications
Brake system: Disc brake
Disc mount: 6-bolt
Rear hub standard: 12 x 148 mm TA
Wheel size: 27.5 inch
Hole count: 28
Material: Aluminum
Cassette body: SRAM XD
Front hub standard: 15 x 110 mm TA
Wheel size: 29 inch