FOX 40 K, FLOAT 27.5 F-S 203mm Grip 2
FOR DOWNHILL RACE and BIKE PARK
Developed on the World Cup tracks around the world, the 40 always has a place on the podium in mind and is the ultimate suspension fork for DH races.
A Grip2 damper with VVC, a revised EVOL air spring and many other performance-specific features ensure
that the 40 no longer has to give up her place in the hot seat.
Area of application: downhill / bike park
Wheel size: 27.5 inches (650B)
Suspension: Air
Travel: 203 mm
Steerer tube: 1 1/8
Axle system: thru axle
Wheel standard: 20 x 110 mm (Boost)
Brake mount: Disc PM8 (direct mount 203 mm) compatible up to 230 mm
Standpipe finish: Kashima Coat
Air Ducts: Yes
Vent valves: Yes
Floating axle: Yes
Mudguard mount: Optional FOX 40 Mudguard with robust Direct Mount 4-point attachment
Technical data:
Lead: 48 mm
Shaft length: unshortened 272 mm
Shaft diameter of stem clamp: 28.6 mm
Shaft diameter cone seat: 30 mm
Installation height: 585.6 mm
Installation width: 110 mm
Standpipe diameter: 40 mm
Steerer material: aluminum
Fork crown material: aluminum
Standpipe material: aluminum
Material dip tubes: Magnesium
Setting options:
Pressure level: high-speed, low-speed
Rebound: High-Speed, Low-Speed
Spring hardness: above air pressure
Remote: No
Spring travel adjustment: No
Approvals for tire size max.: 27.5 x 2.5
Note: Tire clearance must be checked each time a tire or rim is changed with the fork fully compressed.
It should be at least 8.5 mm all around.
Brake disc size max.: 230 mm
Weight limit: 140 kg (system weight)
Air pressure max.: 120 psi (8.3 bar)
Features:
GRIP2 damping cartridge with maximum adjustment options
Adjustment of high-speed compression and rebound with 8 clicks like with X2 dampers
Floating axle for optimal alignment of hub and suspension fork as well as high rigidity for downhill racing
with vent valves for quick, uncomplicated adjustment to the ambient air pressure
Fork bridge design optimized for more rigidity, more space in the head tube area and shorter lead
Air and oil channels in the dip tubes for continuous lubrication of the foam rings and avoid excessive pressure increases
VVC (Variable Valve Control) for high-speed compression and rebound
Factory series with Kashima coating for minimized friction and optimized response
Float EVOL air suspension for sensitive response, more linear spring characteristics and optimal support throughout the entire suspension travel
Technologies: Kashima Coat
The striking gold Genuine Kashima Coat coating offers outstanding overall performance and ensures minimal friction
and optimal response with maximum durability.
Scope of delivery:
1 x suspension fork Fox Racing Shox 40 Float 27.5" GRIP2 Factory Boost
1 x Fox Racing Shox thru axle
3 x volume spacers Fox Racing Shox
2 x stop rubber
1 x star nut
FOX manufacturer number: 910-20-247
FOX manufacturer name:
2022.40, K, FLOAT, 27.5in, F-S, 203, Grip 2, HSC, LSC, HSR, LSR, Shiny Blk, Orange/Gloss Blk Logo, 20TAx110. 1.125, Flat, 48mm Rake Matte Blk, AM
Developed on the World Cup tracks around the world, the 40 always has a place on the podium in mind and is the ultimate suspension fork for DH races.
A Grip2 damper with VVC, a revised EVOL air spring and many other performance-specific features ensure
that the 40 no longer has to give up her place in the hot seat.
Area of application: downhill / bike park
Wheel size: 27.5 inches (650B)
Suspension: Air
Travel: 203 mm
Steerer tube: 1 1/8
Axle system: thru axle
Wheel standard: 20 x 110 mm (Boost)
Brake mount: Disc PM8 (direct mount 203 mm) compatible up to 230 mm
Standpipe finish: Kashima Coat
Air Ducts: Yes
Vent valves: Yes
Floating axle: Yes
Mudguard mount: Optional FOX 40 Mudguard with robust Direct Mount 4-point attachment
Technical data:
Lead: 48 mm
Shaft length: unshortened 272 mm
Shaft diameter of stem clamp: 28.6 mm
Shaft diameter cone seat: 30 mm
Installation height: 585.6 mm
Installation width: 110 mm
Standpipe diameter: 40 mm
Steerer material: aluminum
Fork crown material: aluminum
Standpipe material: aluminum
Material dip tubes: Magnesium
Setting options:
Pressure level: high-speed, low-speed
Rebound: High-Speed, Low-Speed
Spring hardness: above air pressure
Remote: No
Spring travel adjustment: No
Approvals for tire size max.: 27.5 x 2.5
Note: Tire clearance must be checked each time a tire or rim is changed with the fork fully compressed.
It should be at least 8.5 mm all around.
Brake disc size max.: 230 mm
Weight limit: 140 kg (system weight)
Air pressure max.: 120 psi (8.3 bar)
Features:
GRIP2 damping cartridge with maximum adjustment options
Adjustment of high-speed compression and rebound with 8 clicks like with X2 dampers
Floating axle for optimal alignment of hub and suspension fork as well as high rigidity for downhill racing
with vent valves for quick, uncomplicated adjustment to the ambient air pressure
Fork bridge design optimized for more rigidity, more space in the head tube area and shorter lead
Air and oil channels in the dip tubes for continuous lubrication of the foam rings and avoid excessive pressure increases
VVC (Variable Valve Control) for high-speed compression and rebound
Factory series with Kashima coating for minimized friction and optimized response
Float EVOL air suspension for sensitive response, more linear spring characteristics and optimal support throughout the entire suspension travel
Technologies: Kashima Coat
The striking gold Genuine Kashima Coat coating offers outstanding overall performance and ensures minimal friction
and optimal response with maximum durability.
Scope of delivery:
1 x suspension fork Fox Racing Shox 40 Float 27.5" GRIP2 Factory Boost
1 x Fox Racing Shox thru axle
3 x volume spacers Fox Racing Shox
2 x stop rubber
1 x star nut
FOX manufacturer number: 910-20-247
FOX manufacturer name:
2022.40, K, FLOAT, 27.5in, F-S, 203, Grip 2, HSC, LSC, HSR, LSR, Shiny Blk, Orange/Gloss Blk Logo, 20TAx110. 1.125, Flat, 48mm Rake Matte Blk, AM
Product weight: 2.816 kg
| Shipping weight: | 6.000 kg |
| Product weight: | 2.816 kg |