Fanes 6.1 275/29 Custom (Mullet)
Geblieben ist der bewährte und ausgesprochen sensible STS-Hinterbau, sowie die sehr elegante Formensprache des hydrogeformten Rahmens mit seinen fast schon organisch anmutenden Linienführungen.
Neu gegenüber dem Vorgänger Fanes 6.0 ist die Fertigung des Rahmens in Deutschland (geschweißt direkt bei uns im Headquater in Ascheffel). Ein ganz leichtes Feintuning haben wir außerdem bei der Geometrie vorgenommen: die neuen Rahmen sind jeweils einen Zentimeter länger geworden, der Lenkwinkel ist ein Grad flacher. Mit dieser Anpassung hast du noch etwas mehr Platz zum Spielen auf dem Bike, verbunden mit noch mehr Laufruhe und Sicherheit.
Die Fanes 6.1 Mullet ist das Optimum aus beiden Laufradwelten, Vorne 29Zoll steht für Laufruhe und Führungskraft. Hinten 27,5Zoll ist nach wie vor für die Version mit den handlicheren kleinen Laufrad- der perfekte Gefährte für alles, was verspielt bergauf und bergab geht - und natürlich alles dazwischen.
Use Condition

Category 5
This is a set of conditions for operation of a bicycle that includes Conditions 1, 2, 3, and 4; extreme jumping; or downhill grades on rough trails at speeds in excess of 40 km/h (25 mph); or a combination thereof.
A description of all categories and more information about intended use can be found here.
Intendet Use: | Enduro All-Mountain |
Wheel size: | 29 275 |
model year: | 2023 |
Shipping weight: | 25.000 Kg |
Product weight: | 14.100 kg / pcs. |
Shock: | as configured |
Fork: | as configured |
Headset: | AZX-203 R3 ZS44/56 |
Stem: | as configured |
Handlebars: | as configured |
Grips: | M-Wave Lock-on |
Seat Collar: | TwinWorks CNC bolt 34,9mm |
Seat Post: | as configured |
Saddle: | as configured |
Shifter: | as configured |
Rear Derailleur: | as configured |
Crank Set: | as configured |
Bottom Bracket: | as configured |
Chain: | as configured |
Cassette: | as configured |
Brakes: | as configured |
Wheel Set: | DT Swiss E532/370 29/275 Zoll 15x110mm / 12x 148mm |
Tyres: | Maxxis Assegai 29x2,5 / DHRII 27,5x2,4 |
Tubes: | Maxxis Welter Weight |
Pedals: | optional |
Hanger: | Type 1, extra hanger included |
This page contains a list of all color which are available from Alutech for powder coating your frame. The reproduction of these colors is for orientation only and not in any way binding. Please read our comments about color fidelity and monitor calibration at the bottom of the page. When you scroll over or touch an icon, you will see its code and name.
Colors marked with this symbol have a metallic effect.RAL-colors standard and metallic
Special colors, standard and metallic
The following colors are not part of the RAL color standard and are also offerd as an option for powder coating.
Glaze colors
Glazing a frame consists of a thin powder coating which, after curing, is coverd with a second layer of transparent paint which is then cured once more at a lower temperature. Please not that this type of color can only be applied to brushed allumnium frame. Otherwise the semi-transparent effect would not work.
The following has been taken from the WikiPedia page RAL-Farbe and translated to english:
The colors shown here will be displayed differently on different monitors and are not binding. A possibility to aproximatly calibrate your monitor on a purly visual basis is the test picture on the left: If on one or more areas a letter („R“ for red, „G“ for green or „B“ for blue) becomes clearly visible, you can adjust the corresponding color gamut on your monitor. The picture is calibrated to a color gamut of 2.2 - the common value fo IBM-compatible computers. Apple-Macintosh computers use a value of 1.8 up to version 10.5 („Leopard“) and also a value of 2.2 from version 10.6 („Snow Leopard“).
Geometry chart and sizing recommendation

Along with geometry data and frame specs, this PDF file contains sizing recommendations.
Click here to download PDF