Formula Cura 4 disc brake, black anodized
FORMULA disc brake Cura 4 in an elegant black glossy anodized finish
With the Cura 4, the developers at Formula have set themselves a very ambitious goal - maximum braking power,
best ergonomics and modulation values as well as excellent service friendliness.
The brake lever known from the small Cura was adopted; it is the most ergonomic that Formula has developed to date and
Can be mounted on the left or right of the handlebar thanks to the practical flip-flop attachment.
The real innovation, however, is the new 4-piston brake caliper, each with four 18 mm brake pistons.
This enables a very high braking force and a very differentiated pressure point on the brake lever.
The combination with the forged two-piece saddle and a low-friction anodized layer results in an unprecedented
Braking power combined with high reliability.
This means that this brake can be used in the gravity sector as well as on e-bikes.
The Cura 4 is now also operated with specially developed mineral oil.
A higher boiling point and an extremely low freezing point characterize this braking medium compared to other manufacturers
and thus meets Formula's requirements.
Several ventilation openings make filling and bleeding the brake child's play.
technical data:
Areas of application: All Mountain, Trail, Enduro, Downhill
Brake caliper material: forged aluminum, CNC machined
Brake lever material: forged aluminum
Hardware mounting material: steel/stainless steel
Pistons: 4 (diameter 18 mm)
Brake mounting: Postmount 6"
Brake disc: 6 hole, or Centerlock steel disc (optional)
Brake medium: mineral oil
Brake hose: plastic with Kevlar reinforcement
Brake pad: organic, top loading
Mounting: on both sides (flip-flop)
Clamp: split, simple version, not the MixMaster, we use the MAGURA version, why, because it is lighter!
Brake hose length: VR and HR 2000 mm
Color: glossy black, white lasered decals
MixMaster:
The MixMaster handlebar clamp is an option for installing your Shimano and SRAM shifters directly on the Formula brake,
which gives your handlebars a cleaner look.
Weight: 265g (one brake at the front or rear, without brake disc and adapter)
Scope of delivery:
1x Formula Cura 4 disc brake
2x pairs of brake pads, organic, installed
2x screws for the brake caliper fastening
1x Formula Olive and 1x insert pin for shortening the brake line
without brake disc and adapter or MixMaster adapter, these can be ordered separately
With the Cura 4, the developers at Formula have set themselves a very ambitious goal - maximum braking power,
best ergonomics and modulation values as well as excellent service friendliness.
The brake lever known from the small Cura was adopted; it is the most ergonomic that Formula has developed to date and
Can be mounted on the left or right of the handlebar thanks to the practical flip-flop attachment.
The real innovation, however, is the new 4-piston brake caliper, each with four 18 mm brake pistons.
This enables a very high braking force and a very differentiated pressure point on the brake lever.
The combination with the forged two-piece saddle and a low-friction anodized layer results in an unprecedented
Braking power combined with high reliability.
This means that this brake can be used in the gravity sector as well as on e-bikes.
The Cura 4 is now also operated with specially developed mineral oil.
A higher boiling point and an extremely low freezing point characterize this braking medium compared to other manufacturers
and thus meets Formula's requirements.
Several ventilation openings make filling and bleeding the brake child's play.
technical data:
Areas of application: All Mountain, Trail, Enduro, Downhill
Brake caliper material: forged aluminum, CNC machined
Brake lever material: forged aluminum
Hardware mounting material: steel/stainless steel
Pistons: 4 (diameter 18 mm)
Brake mounting: Postmount 6"
Brake disc: 6 hole, or Centerlock steel disc (optional)
Brake medium: mineral oil
Brake hose: plastic with Kevlar reinforcement
Brake pad: organic, top loading
Mounting: on both sides (flip-flop)
Clamp: split, simple version, not the MixMaster, we use the MAGURA version, why, because it is lighter!
Brake hose length: VR and HR 2000 mm
Color: glossy black, white lasered decals
MixMaster:
The MixMaster handlebar clamp is an option for installing your Shimano and SRAM shifters directly on the Formula brake,
which gives your handlebars a cleaner look.
Weight: 265g (one brake at the front or rear, without brake disc and adapter)
Scope of delivery:
1x Formula Cura 4 disc brake
2x pairs of brake pads, organic, installed
2x screws for the brake caliper fastening
1x Formula Olive and 1x insert pin for shortening the brake line
without brake disc and adapter or MixMaster adapter, these can be ordered separately
Product weight: 265 g
Product weight: | 265 g |