Formula Cura disc brake front & rear set, with MixMaster, matt black
With the Cura, a new era begins at Formula.
It is the first hydraulic disc brake from the traditional Italian manufacturer,
which uses mineral oil as a brake medium instead of DOT brake fluid.
But the fundamental changes compared to previous generations of Formula brakes are not enough.
The brake lever is also a completely new development and now has an axial master cylinder,
which, like the two-piece brake caliper, is made of forged and anodized aluminum.
The two oversized pistons with a diameter of 24 mm inside the brake caliper also give the Cura a,
especially for a 2-piston brake, exceptional braking power,
According to Formula, the effective range of the powerful stopper even extends to the MTB downhill area.
And the Cura also looks damn good.
Details:
· for front wheel or rear wheel
· Areas of application: tour, trail, all-mountain, enduro, downhill
· fully hydraulic 2-piston disc brake
· Two-piece postmount brake caliper with 24 mm piston diameter
· Axial master cylinder for ergonomic and intuitive modulation
· Brake caliper and lever housing made of forged and anodized aluminum
· Brake lever can be used on the right and left (flip-flop design)
· Lever width adjustable
· Ventilation openings on the top and bottom of the encoder
· MixMaster
· Brake fluid: Formula mineral oil
· Brake pads: organic
· Cable length: 2000 mm (can be shortened)
· Weight: 265 g (200 cm cable)
· Color: Matt Black
Recommended brake discs:
· Formula Monolitic brake disc 6-hole (Alutech order number FOR200200)
Scope of delivery:
2x disc brake (for front and rear) with brake handle, brake caliper and brake line filled and bled ready for installation.
2x single clamp (Magura, aluminum, black colour)
2x MixMaster clamp
2x olive and 2x insert pin for shortening the cable
4x fastening screws
WITHOUT brake discs and WITHOUT adapter!
It is the first hydraulic disc brake from the traditional Italian manufacturer,
which uses mineral oil as a brake medium instead of DOT brake fluid.
But the fundamental changes compared to previous generations of Formula brakes are not enough.
The brake lever is also a completely new development and now has an axial master cylinder,
which, like the two-piece brake caliper, is made of forged and anodized aluminum.
The two oversized pistons with a diameter of 24 mm inside the brake caliper also give the Cura a,
especially for a 2-piston brake, exceptional braking power,
According to Formula, the effective range of the powerful stopper even extends to the MTB downhill area.
And the Cura also looks damn good.
Details:
· for front wheel or rear wheel
· Areas of application: tour, trail, all-mountain, enduro, downhill
· fully hydraulic 2-piston disc brake
· Two-piece postmount brake caliper with 24 mm piston diameter
· Axial master cylinder for ergonomic and intuitive modulation
· Brake caliper and lever housing made of forged and anodized aluminum
· Brake lever can be used on the right and left (flip-flop design)
· Lever width adjustable
· Ventilation openings on the top and bottom of the encoder
· MixMaster
· Brake fluid: Formula mineral oil
· Brake pads: organic
· Cable length: 2000 mm (can be shortened)
· Weight: 265 g (200 cm cable)
· Color: Matt Black
Recommended brake discs:
· Formula Monolitic brake disc 6-hole (Alutech order number FOR200200)
Scope of delivery:
2x disc brake (for front and rear) with brake handle, brake caliper and brake line filled and bled ready for installation.
2x single clamp (Magura, aluminum, black colour)
2x MixMaster clamp
2x olive and 2x insert pin for shortening the cable
4x fastening screws
WITHOUT brake discs and WITHOUT adapter!
Product weight: 530 g
| Product weight: | 530 g |
