Fox 38 K Float 29in F-S 170 Grip 2 HSC LSC HSR
THE FEARLESS LONG-TRAVEL ENDURO SPECIALIST
If the drops are high and the jumps are long, go for the 38.
Optimized for 160mm to 180mm travel and packed with the same features as the 36,
The 38 redefines expectations for a long-stroke single-crown suspension fork and sets standards in terms of trust, performance and robustness.
Equipped for big things.
Specifications:
Area of application: Enduro
Wheel size: 29 inch
Suspension: Air
Travel: 170 mm
Steerer tube: 1 1/8 - 1.5 tapered
Axle system: Thru axle with quick release lever
Wheel standard: 15 x 110 mm (Boost)
Brake mount: Disc PM7 (direct mount 180 mm)
Technical data:
Lead: 44 mm
Shaft length: unshortened 264 mm
Shaft diameter of stem clamp: 28.6 mm
Shaft diameter cone seat: 40 mm
Hub installation width: 110 mm
Standpipe diameter: 38 mm
Steerer material: aluminum
Fork crown material: aluminum
Standpipe material: aluminum
Material dip tubes: Magnesium
Setting options:
Pressure level: high-speed, low-speed
Rebound: High-Speed, Low-Speed
Spring hardness: above air pressure
Remote: No
Spring travel adjustment: No
Approvals for tire size max.: 29 x 2.6
Note: Tire clearance must be checked each time a tire or rim is changed with the fork fully compressed.
It should be at least 8.5 mm all around.
Brake disc size max.: 230 mm
Weight limit: 169 kg (system weight)
Air pressure max.: 140 psi (9.6 bar)
Features:
GRIP2 damping cartridge with maximum adjustment options
Adjustment of high-speed compression and rebound with 8 clicks like with X2 dampers
Floating axle for optimal alignment of hub and suspension fork
with vent valves for quick, uncomplicated adjustment to the ambient air pressure
Fork bridge design optimized for more rigidity, more space in the head tube area and shorter lead
Air and oil channels in the dip tubes for continuous lubrication of the foam rings and avoid excessive pressure increases
Internally elliptical head tube for high rigidity with minimal weight
VVC (Variable Valve Control) for high-speed compression and rebound
Factory series with Kashima coating for minimized friction and optimized response
Float EVOL air suspension for sensitive response, more linear spring characteristics and optimal support throughout the entire suspension travel
Technologies:
Kashima Coat: The striking golden Genuine Kashima Coat coating offers outstanding overall performance
and ensures minimal friction and optimal response with maximum durability.
Version: 170 mm / 1.5 tapered / 15 x 110 mm / 44 mm
Travel: 170 mm
Lead: 44 m
Installation height: 583.7 mm
Manufacturer numbers: 910-21-022 (shiny black)
Weight weighed: 2385g
Scope of delivery:
1 x suspension fork Fox Racing Shox 38 Float 29 inch GRIP2 Factory Boost
1 x Fox Racing Shox thru axle with quick release lever
3 x volume spacers Fox Racing Shox
1 x cable routing
1 x star nut
If the drops are high and the jumps are long, go for the 38.
Optimized for 160mm to 180mm travel and packed with the same features as the 36,
The 38 redefines expectations for a long-stroke single-crown suspension fork and sets standards in terms of trust, performance and robustness.
Equipped for big things.
Specifications:
Area of application: Enduro
Wheel size: 29 inch
Suspension: Air
Travel: 170 mm
Steerer tube: 1 1/8 - 1.5 tapered
Axle system: Thru axle with quick release lever
Wheel standard: 15 x 110 mm (Boost)
Brake mount: Disc PM7 (direct mount 180 mm)
Technical data:
Lead: 44 mm
Shaft length: unshortened 264 mm
Shaft diameter of stem clamp: 28.6 mm
Shaft diameter cone seat: 40 mm
Hub installation width: 110 mm
Standpipe diameter: 38 mm
Steerer material: aluminum
Fork crown material: aluminum
Standpipe material: aluminum
Material dip tubes: Magnesium
Setting options:
Pressure level: high-speed, low-speed
Rebound: High-Speed, Low-Speed
Spring hardness: above air pressure
Remote: No
Spring travel adjustment: No
Approvals for tire size max.: 29 x 2.6
Note: Tire clearance must be checked each time a tire or rim is changed with the fork fully compressed.
It should be at least 8.5 mm all around.
Brake disc size max.: 230 mm
Weight limit: 169 kg (system weight)
Air pressure max.: 140 psi (9.6 bar)
Features:
GRIP2 damping cartridge with maximum adjustment options
Adjustment of high-speed compression and rebound with 8 clicks like with X2 dampers
Floating axle for optimal alignment of hub and suspension fork
with vent valves for quick, uncomplicated adjustment to the ambient air pressure
Fork bridge design optimized for more rigidity, more space in the head tube area and shorter lead
Air and oil channels in the dip tubes for continuous lubrication of the foam rings and avoid excessive pressure increases
Internally elliptical head tube for high rigidity with minimal weight
VVC (Variable Valve Control) for high-speed compression and rebound
Factory series with Kashima coating for minimized friction and optimized response
Float EVOL air suspension for sensitive response, more linear spring characteristics and optimal support throughout the entire suspension travel
Technologies:
Kashima Coat: The striking golden Genuine Kashima Coat coating offers outstanding overall performance
and ensures minimal friction and optimal response with maximum durability.
Version: 170 mm / 1.5 tapered / 15 x 110 mm / 44 mm
Travel: 170 mm
Lead: 44 m
Installation height: 583.7 mm
Manufacturer numbers: 910-21-022 (shiny black)
Weight weighed: 2385g
Scope of delivery:
1 x suspension fork Fox Racing Shox 38 Float 29 inch GRIP2 Factory Boost
1 x Fox Racing Shox thru axle with quick release lever
3 x volume spacers Fox Racing Shox
1 x cable routing
1 x star nut
Product weight: 2.385 kg
| Shipping weight: | 8.000 kg |
| Product weight: | 2.385 kg |
