eFanes 29/275 nextGeneration AXS Custom
True Leasing
For employees in Germany it is possible to lease this item. Click on a logo to know more.
Top news and from now on it is possible to mount a drinking bottle on all eFanes frames,
all new frames are equipped with threaded eyelets below the top tube and in front of the shock mount.
This means that a small 350ml standard bottle can be mounted on a small frame size and a 450ml Fidlock drinking bottle on a medium frame size.
The first eFanes was delivered in June 2021 - and the e-MTB from Alutech has since garnered a lot of enthusiastic comments and even more smiling faces. And that despite, or perhaps because of, the wide range in which the eFanes is moved.
The eFanes nextGeneration now represents the next stage of evolution and combines the best of our flagship CNC eFanes and Armageddon:
The design: the lines are even closer to the 'big brother', the legendary CNC eFanes. This was made possible not least by the new, CNC-milled motor bridge. However, the CNC motor bridge also has tangible technical advantages: the dock leveler is now more protected and easier to access. The cable routing has been optimized and designed to be more service-friendly. The rigidity is even higher. The shock mount and the chainstay yoke have also been significantly optimized in terms of weight and stiffness.
The weight: the frame has become over a kilo lighter, particularly due to the new design!
A rather small detail in terms of weight, but all the more appropriate and stylish for this bike: the shock mount screws and the screws for the motor attachment are light and high-strength T40 titanium screws.
The geometry: the steering and seat angles have been changed - the steering angle even in two directions. Depending on individual preferences, there is a choice between a somewhat more moderate version with a more manageable/touring-friendly 64° steering angle and a more progressive, downhill-oriented version with 62.5°. The seat tube angle has become steeper at 78°.
For the custom version of the eFanes the Shimano battery with 630Wh is set.
However, we have not changed our #trueriding philosophy: both the Shimano drive units (EP8 and EP801) and the components can be put together individually. And of course all frames are hand-welded and carefully assembled by us in Ascheffel.
The result is our best bike so far: super balanced, smooth-running and at the same time easy to handle, as usual hungry for propulsion and yet with plenty of traction following the trail - the eFanes nextGeneration will make you a better biker too! Because it doesn't matter whether it's for a relaxed tour, sporty use on trails, the ambitious descents and, of course, ascents in the mountains from the Harz Mountains to the Mediterranean, use in the area of it's spiritual roots (Fanes / Dolomites), up to racing in the E-EWS - the eFanes is fun everywhere!
And for everyone who wants to know exactly:
The frame is still tested for ASTM category 5 (as are all Fanes models), but the eFanes is only awarded category 4 overall due to the maximum approval of the wheels for category 4 for E-MTB.
all new frames are equipped with threaded eyelets below the top tube and in front of the shock mount.
This means that a small 350ml standard bottle can be mounted on a small frame size and a 450ml Fidlock drinking bottle on a medium frame size.
The first eFanes was delivered in June 2021 - and the e-MTB from Alutech has since garnered a lot of enthusiastic comments and even more smiling faces. And that despite, or perhaps because of, the wide range in which the eFanes is moved.
The eFanes nextGeneration now represents the next stage of evolution and combines the best of our flagship CNC eFanes and Armageddon:
The design: the lines are even closer to the 'big brother', the legendary CNC eFanes. This was made possible not least by the new, CNC-milled motor bridge. However, the CNC motor bridge also has tangible technical advantages: the dock leveler is now more protected and easier to access. The cable routing has been optimized and designed to be more service-friendly. The rigidity is even higher. The shock mount and the chainstay yoke have also been significantly optimized in terms of weight and stiffness.
The weight: the frame has become over a kilo lighter, particularly due to the new design!
A rather small detail in terms of weight, but all the more appropriate and stylish for this bike: the shock mount screws and the screws for the motor attachment are light and high-strength T40 titanium screws.
The geometry: the steering and seat angles have been changed - the steering angle even in two directions. Depending on individual preferences, there is a choice between a somewhat more moderate version with a more manageable/touring-friendly 64° steering angle and a more progressive, downhill-oriented version with 62.5°. The seat tube angle has become steeper at 78°.
For the custom version of the eFanes the Shimano battery with 630Wh is set.
However, we have not changed our #trueriding philosophy: both the Shimano drive units (EP8 and EP801) and the components can be put together individually. And of course all frames are hand-welded and carefully assembled by us in Ascheffel.
The result is our best bike so far: super balanced, smooth-running and at the same time easy to handle, as usual hungry for propulsion and yet with plenty of traction following the trail - the eFanes nextGeneration will make you a better biker too! Because it doesn't matter whether it's for a relaxed tour, sporty use on trails, the ambitious descents and, of course, ascents in the mountains from the Harz Mountains to the Mediterranean, use in the area of it's spiritual roots (Fanes / Dolomites), up to racing in the E-EWS - the eFanes is fun everywhere!
And for everyone who wants to know exactly:
The frame is still tested for ASTM category 5 (as are all Fanes models), but the eFanes is only awarded category 4 overall due to the maximum approval of the wheels for category 4 for E-MTB.
Product weight: 23.000 kg
Use Condition
Category 4
This is a set of conditions for operation of a bicycle that includes Conditions 1, 2, and 3, or downhill grades on rough trails at speeds less than 40 km/h (25 mph), or both. Jumps are intended to be less than 122cm (48).
A description of all categories and more information about intended use can be found here.
| Intendet Use: | Enduro |
| Wheel size: | 275 / 29 (Mullet) |
| model year: | 2024 |
| Shipping weight: | 30.000 kg |
| Product weight: | 23.000 kg |
| Color / Design: | Alu raw |
| Shock: | as configurated |
| Motor: | as configurated |
| Battery: | Shimano BT-EN8036 / BT-EN806A (630Wh) |
| Power-button: | Alutech remote on downtube |
| Display: | Shimano SC-EM800 |
| Charger: | Shimano EC-E8004 |
| Fork: | as configurated |
| Headset: | Acros |
| Stem: | TwinWorks CNC 35mm |
| Handlebars: | Protaper Team Polished alu 35x810mm, 25mm rise |
| Grips: | TwinWorks lock-on single clamp |
| Seat Collar: | TwinWorks CNC 34,9mm |
| Seat Post: | as configurated BikeYoke Revive or Fox Transfer |
| Saddle: | Sqlab Infinergy Active |
| Shifter: | SRAM AXS controller |
| Rear Derailleur: | as configurated SRAM GX-Eagle AXS or XX1-Eagle AXS 12-speed (incl. battery charger for AXS battery) |
| Chain Guide: | e*thirteen Type EP8 |
| Crank Set: | Shimano FC-EM600A 165mm 34T |
| Chain: | as configurated SRAM GX-Eagle or XX1-Eagle rainbow 12-speed |
| Cassette: | as configurated SRAM XG-1275 or XG-1299 rainbow 10-52T |
| Brakes: | as configurated |
| Wheel Set: | as configurated |
| Tyres: | Maxxis Assegai 29x2.5 3C MaxxTerra Exo+ TR / Maxxis Minion DHR II 27,5x2.6 3C MaxxTerra Exo+ TR |
| Tubes: | Maxxis Welter Weight |
| Pedals: | without / as option |
| Hanger: | Type 1.2, extra hanger included |
